Daylight on a Stick (COB)
Abbildung ähnlich
19,99 €*
Inhalt: 2 Stück (10,00 €* / 1 Stück)
Sofort verfügbar, Lieferzeit: 1-3 Werkage
Produktnummer: FLG-VRN-PCB-DL8-COB-XL
Produktinformationen "Daylight on a Stick (COB)"
COB
- chainable 24V LED bar
- on both sides a JST-XH 2 pin connector (black)
- CRI >= 90
- CTT = 4000K
- Typical Luminous Efficacy = 188lm/W
- Typical Flux @25°C
Stick XXL 2x 660lm Stick 2x 500lm Matchstick 2x 330lm
RGB
- chainable 5V RGB LED bar
- on both sides a JST-XH 3 pin connector (black)
- WS2812B LEDs
- one resistor for the dataline is inside each box, in case you need it to get right color control
- Klipper color order: GRB
Length
| Stick XXL | 370mm | for V2/TR 350 |
| Stick | 270mm | for V2/TR 250/300 |
| Matchstick | 158mm | for V0.1/V0.2 |
Note
Based on BLAMM's Daylight Voron Hardware design.
Eigenschaften "Daylight on a Stick (COB)"
| Daylight / Größe: | XL |
|---|---|
| Daylight / LED: | COB |
| Drucker / Bauraum: | 250 mm³, 300 mm³ |
| Spannung: | 24 V/DC |
| Voron / Modell: | Trident, VORON1 V1.8, VORON2 V2.4 |
Hersteller "Fermio Labs GmbH"
Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.
Weiterführende Links des Herstellers
Bill of Materials for "Daylight on a Stick (COB)"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | ||||||
| VORON Legacy | ||||||
| VORON Switchwire | ||||||
| VORON Trident | 1 | 1 | ||||
| VORON0 V0.1 | ||||||
| VORON0 V0.2 | ||||||
| VORON1 V1.8 | 1 | 1 | ||||
| VORON2 V2.4 | 1 | 1 |
Anmelden
Kunden kauften auch
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
5,99 €*
> 500 lagernd
Top
ALL
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
2,99 €*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Inhalt: 100 Stück (0,09 €* / 1 Stück)
8,99 €*
Nur 5 auf Lager!
Top
ALL
SSR Halbleiter Solid State Relais DC/AC, 230 V AC 10 A
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet
12,99 €*
Top
ALL
Halbleiterrelais Adapter für Hutschienenmontage
Adapterplatte zur Befestigung eines SSR-Relais an einer Hutschiene. Vollmetall eloxiert mit Federkralle.
3,99 €*
> 500 lagernd
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive 3,99 €*
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Inhalt: 10 Stück (0,40 €* / 1 Stück)
Varianten ab 2,99 €*