E3D Revo™ Voron Edition, 24V, Single Nozzle Kit
Abbildung ähnlich
Smaller, lighter, REDDER. Say hello to the Revo Voron, the HotEnd of choice for Voron 3D printers. E3D developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
89,99 €*
Inhalt: 1 Bausatz
Sofort verfügbar, Lieferzeit: 1-3 Werkage
Produktnummer: E3D-REVO-VRN-24V-SNK
Produktinformationen "E3D Revo™ Voron Edition, 24V, Single Nozzle Kit"
E3D developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with their Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers.
- Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening
- Works with a Revo HeaterCore for faster heat-ups
- Rigid mounting using 4 x M3 x 0.5 bolts
- Ultra-lightweight construction for improved speed performance
- Ideal HotEnd for Voron StealthBurner
Ready for Revo
A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers.
Complements your Voron
Includes an anodised red aluminium heatsink to complement your Voron accented parts.
Rigid mounting
This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer.
Wire harness compatibility
Please note that this is a custom production. The Thermistor and HeaterCore are wired to match our wire harness.
Eigenschaften "E3D Revo™ Voron Edition, 24V, Single Nozzle Kit"
| Nozzle / Durchmesser: | 0.4 mm |
|---|---|
| Spannung: | 24 V/DC |
| Voron / Modell: | Switchwire, Trident, VORON0 V0.1, VORON0 V0.2, VORON2 V2.4 |
| Voron / Spezifikation: | 120, 250, 300, 350 |
Bill of Materials for "E3D Revo™ Voron Edition, 24V, Single Nozzle Kit"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 180 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|---|
| Annex K3 | ||||||
| VORON Legacy | 1 | |||||
| VORON Switchwire | 1 | |||||
| VORON Trident | 1 | 1 | 1 | |||
| VORON0 V0.1 | 1 | |||||
| VORON0 V0.2 | 1 | |||||
| VORON1 V1.8 | 1 | 1 | ||||
| VORON2 V2.4 | 1 | 1 | 1 |
Anmelden
Key Features:
- Max temp: 300°C
- Voltage: 24V
- Wattage: 40W
- Mounting System: 4 x M3 x 0.5
- Filament diameter: 1.75
Kit Includes:
- 1 x Revo Voron Sink
- 1 x Revo HeaterCore 24V
- 1 x Revo spring
- 1 x 100mm 1.75mm PTFE
- 1 x Heater & Temperature extension cable
- 1 x 0.40mm brass Revo Nozzle
E3D Revo™
Ausverkauft
Tipp
E3D Revo™ Brass Nozzle, 0.15 mm 34,99 €*
Nozzle / Durchmesser: 0.15 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. Currently, we have brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo™ Nozzles are not compatible with V6-style heaterblocks You may need to adjust your Z offset when changing nozzles. Special care must be taken when using 0.15mm nozzles as these are more prone to jamming please see our recommended guidelines here
Varianten ab 24,99 €*
Ausverkauft
Tipp
E3D Revo™ Brass Nozzle, 0.25 mm
Nozzle / Durchmesser: 0.25 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. Currently, we have brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo™ Nozzles are not compatible with V6-style heaterblocks You may need to adjust your Z offset when changing nozzles. Special care must be taken when using 0.15mm nozzles as these are more prone to jamming please see our recommended guidelines here
24,99 €*
Tipp
E3D Revo™ Brass Nozzle, 0.4 mm
Nozzle / Durchmesser: 0.4 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. Currently, we have brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo™ Nozzles are not compatible with V6-style heaterblocks You may need to adjust your Z offset when changing nozzles. Special care must be taken when using 0.15mm nozzles as these are more prone to jamming please see our recommended guidelines here
24,99 €*
Ausverkauft
Tipp
E3D Revo™ Brass Nozzle, 0.6 mm
Nozzle / Durchmesser: 0.6 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. Currently, we have brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo™ Nozzles are not compatible with V6-style heaterblocks You may need to adjust your Z offset when changing nozzles. Special care must be taken when using 0.15mm nozzles as these are more prone to jamming please see our recommended guidelines here
24,99 €*
Nur 5 auf Lager!
Tipp
E3D Revo™ Brass Nozzle, 0.8 mm
Nozzle / Durchmesser: 0.8 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. Currently, we have brass nozzles in 0.15mm, 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high-flow variants are already on our roadmap and will follow over time. Please note: Revo™ Nozzles are not compatible with V6-style heaterblocks You may need to adjust your Z offset when changing nozzles. Special care must be taken when using 0.15mm nozzles as these are more prone to jamming please see our recommended guidelines here
24,99 €*
Tipp
E3D Revo™ Brass Nozzle, Triple Pack, 1 x 0.25 / 0.6 / 0.8 mm
Nozzle / Triple Pack: 1 x 0.25 / 0.6 / 0.8 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.40mm, 0.60mm and 0.80mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.
69,99 €*
Ausverkauft
Tipp
E3D Revo™ Brass Nozzle, Triple Pack, 3 x 0.4 mm
Nozzle / Triple Pack: 3 x 0.4 mm
Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening – just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print. Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution. Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn! An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.40mm, 0.60mm and 0.80mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.
69,99 €*
Ausverkauft
E3D Revo™ Fully Loaded Sock Pack
E3D colour-coded silicone socks for Revo Nozzles. Never run out of silicone socks for your Revo 3D printing setup! This colour-coded sock kit includes ten silicone socks for all your 3D printing needs. The Revo Fully Loaded Sock Pack contains two socks for each Revo Nozzle size and an additional two for the Revo HeaterCore.
5,99 €*
Ausverkauft
E3D Revo™ Spring Triple Pack
These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo Hemera. The spring keeps the HeaterCore firmly attached to the cold side, while pushing it into the nozzle for improved thermal conductivity. Lost the spring for your Revo HeaterCore? Don’t worry, we sell spares! Keeps the HeaterCore into good thermal contact with a Revo Nozzle Effective in attaching Revo HeaterCore to heatsink Compatible with Revo Micro, Revo Six, and Revo Hemera
2,19 €*
Tipp
Top
ALL
E3D Revo™ Voron Edition, 24V, Single Nozzle Kit
E3D / Revo / Kit Type: Single Nozzle Kit | Spannung: 24 V/DC
E3D developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with their Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers. Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening Works with a Revo HeaterCore for faster heat-ups Rigid mounting using 4 x M3 x 0.5 bolts Ultra-lightweight construction for improved speed performance Ideal HotEnd for Voron StealthBurner Ready for Revo A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers. Complements your Voron Includes an anodised red aluminium heatsink to complement your Voron accented parts. Rigid mounting This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer. Wire harness compatibility Please note that this is a custom production. The Thermistor and HeaterCore are wired to match our wire harness.
89,99 €*
Nur 1 auf Lager!
E3D Revo™ Voron HeatSink
E3D developed this Revo-compatible HeatSink in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. (Note: This means this kit will ship without a fan!) Uses Revo Nozzles (sold separately) – change nozzles cold, no tools, no hot tightening Works with a Revo HeaterCore (sold separately) for faster heat-ups Rigid mounting using 4 x M3 x 0.5 bolts Ultra-lightweight construction for improved speed performance Complements your Voron. This machined aluminium heatsink is anodised red to complement your Voron accented parts. Rigid mounting. Rigid mounted design that uses four M3 bolts to secure to your Voron 3D printer. Note Cold side fan not included. See https://docs.vorondesign.com/
34,99 €*
Wire Harness
%
ALL
VORON2 Wire Harness, BTT Octopus, 250 Spec
Controller: BTT Octopus | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 250
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
99,99 €* 109,99 €* (9.09% gespart)
%
ALL
VORON2 Wire Harness, BTT Octopus, 300 Spec 104,99 €* 114,99 €* (8.7% gespart)
Controller: BTT Octopus | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 300
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
Ausverkauft
%
ALL
VORON2 Wire Harness, BTT Octopus, 350 Spec 109,99 €* 119,99 €* (8.33% gespart)
Controller: BTT Octopus | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 350
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
Nur 3 auf Lager!
%
ALL
VORON2 Wire Harness, BTT SKR1.3/1.4, 250 Spec
Controller: BTT SKR 1.3/1.4 | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 250
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
99,99 €* 109,99 €* (9.09% gespart)
Ausverkauft
%
ALL
VORON2 Wire Harness, BTT SKR1.3/1.4, 300 Spec 104,99 €* 114,99 €* (8.7% gespart)
Controller: BTT SKR 1.3/1.4 | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 300
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
Ausverkauft
%
ALL
VORON2 Wire Harness, BTT SKR1.3/1.4, 350 Spec 109,99 €* 119,99 €* (8.33% gespart)
Controller: BTT SKR 1.3/1.4 | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 350
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
%
ALL
VORON2 Wire Harness, FYSETC Spider, 250 Spec
Controller: FYSETC Spider | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 250
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
99,99 €* 109,99 €* (9.09% gespart)
%
ALL
VORON2 Wire Harness, FYSETC Spider, 300 Spec 104,99 €* 114,99 €* (8.7% gespart)
Controller: FYSETC Spider | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 300
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
%
Top
ALL
VORON2 Wire Harness, FYSETC Spider, 350 Spec 109,99 €* 119,99 €* (8.33% gespart)
Controller: FYSETC Spider | Voron / Modell: VORON2 V2.4 | Voron / Spezifikation: 350
Note #1: the wire harness is compatible with VORON Trident and VORON1 V1.8, but marketed as VORON2 V2.4 wire harness. Note #2: For the BTT Octopus you can, optionally / as a fallback, use the SKR wire harness. All required JST-XH connectors are included to do the minor modifications. See our adjustment guide for a conversion. Note #3: The LED wires for StealthBurner are not included and have to be bought separately. Are you still crimping or already printing? If you hate bad crimps and realizing how bad your eye sight really is, we have a solution! We're happy to announce that we're the first source worldwide ever for a ready made drop in wire harness using only the highest quality components available: Drop in ready wire harness for VORON2 V2.4 using 2x BTT SKR 1.3/1.4, 1x BTT Octopus or 1x FYSETC Spider MCUs (one JST connector change required for SKR 1.3) Wire harness 100% made in Germany by a well known wire harness manufacturer. All wires are black Helukabel Heluflon®-fep-6y 0.5mm² for the hotend heater and 0.25 mm² for everything else. Some even call these wires the mother of all cables! Only geniune JST and Molex connectors, crimped with professional dies on semi automatic industrial machines. To keep it black, without distracting white labels, all connectors are directly printed with the function. Black is the new orange! Black/red color coding on both ends for all V+ and V- wires. SKR-Variant: BAT85 Diode already included into the probe signal wire. A and B motor connectors for most common motors with detatchable wires and JST-PH 6 pin connectors X/Y-Endstop prepared for 4 pin JST-XH connector. We recommend our compatible Hall Endstop board or the Microswitch PCB, both with JST-XH connector. All wires at the X carriage terminated with Molex Microfit 3.0 connectors (yes, they fit below the stock cable cover) Sufficient wire length for proper wire management under the skirt.
Varianten ab 99,99 €*
Kunden kauften auch
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.
5,99 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 350 Spec 12,49 €*
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.
Varianten ab 10,49 €*
> 500 lagernd
Top
ALL
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
2,99 €*
Top
ALL
Halbleiterrelais Adapter für Hutschienenmontage
Adapterplatte zur Befestigung eines SSR-Relais an einer Hutschiene. Vollmetall eloxiert mit Federkralle.
3,99 €*
Nur 5 auf Lager!
Top
ALL
SSR Halbleiter Solid State Relais DC/AC, 230 V AC 10 A
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet
12,99 €*
Top
MR85 2RS / MR 085 2RT, 5 x 8 x 2.5 mm, Miniature Deep Groove Ball Bearing 1,99 €*
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.
Varianten ab 0,99 €*