Ausverkauft
Top
ALL
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech / Drive Gear: 1.75 mm / 5 mm
Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.
31,99 €*
Ausverkauft
Top
Bondtech Push-Fit ECAS 4 mm
Push-fit ECAS 4mm is a Bondtech Spare Part to use on the BMG Extruder and on the DDS for CR-10S when a replacement is needed. Size 4 mm is used with 1.75 mm filament.
1,99 €*
Ausverkauft
Top
ALL
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.
Inhalt: 100 Stück (0,09 €* / 1 Stück)
8,99 €*
Top
ALL
F 695 ZZ / F695 ZZ, 5 x 13 x 4 mm, Miniature Flanged Ball Bearing Ab 1,99 €*
Kugellager: F695-ZZ
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.
Varianten ab 0,99 €*
Top
V24
Gates Powergrip® 2GT Belt Loop, 6 mm wide, 188 teeth
Zahnriemen / Breite: 6 mm | Zahnriemen / Zähne: 188
Genuine Gates PowerGrip® GT® 2 belt loops. Low dust and vibration variant (RF). Contents 1 pcs. Gates PowerGrip® GT® 2 Belt Loop
2,99 €*
Nur 1 auf Lager!
Top
ALL
Gates Powergrip® 2GT Pulley, 20 tooth, 6 mm wide, 5 mm bore, black 4,99 €*
Riemenscheibe / Bohrung: 5 mm | Riemenscheibe / Farbe: black | Riemenscheibe / Zähne: 20 | Zahnriemen / Breite: 6 mm
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Varianten ab 3,99 €*
Top
ALL
Gates Powergrip® 2GT Pulley, 20 tooth, 6 mm wide, 5 mm bore, natural
Riemenscheibe / Bohrung: 5 mm | Riemenscheibe / Farbe: natural | Riemenscheibe / Zähne: 20 | Zahnriemen / Breite: 6 mm
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
3,99 €*
Top
K3
V24
Gates Powergrip® 2GT Pulley, 80 tooth, 6 mm wide, 5 mm bore, black 9,99 €*
Riemenscheibe / Bohrung: 5 mm | Riemenscheibe / Farbe: black | Riemenscheibe / Zähne: 80 | Zahnriemen / Breite: 6 mm
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Varianten ab 3,99 €*
Nur 6 auf Lager!
Top
K3
V24
Gates Powergrip® 2GT Pulley, 80 tooth, 6 mm wide, 5 mm bore, natural 8,99 €*
Riemenscheibe / Bohrung: 5 mm | Riemenscheibe / Farbe: natural | Riemenscheibe / Zähne: 80 | Zahnriemen / Breite: 6 mm
Contents 1 pcs. Gates PowerGrip® GT® 2 Pulley 2 pcs. M3/M4 Grub Screw (depends)
Varianten ab 3,99 €*
Top
Misumi Mobius Drive Shaft, 50 mm, Full D-Cut
Antriebswelle / Länge: 50 mm
Diameter: 5 mm (g6, ground)Length: 50/60 mm (~0.3mm)Roundness: 0.004mmStraightness: 0.1/100Surface roughness: 1.6Surface treatment: black burnished Material: EN 1.1191 equivalent
7,99 €*