Powder Coated PEI Spring Steel Sheet, black, 125 x 125 mm

Either rough textured and powder coated or smooth and laminated PEI flexible spring steel sheets. Available both in the colors beige/natural or black. Magnetic properties are similar to our separately sold DIY spring steel sheets. Note Flex plates are coated/laminated 1-sided, only.

GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Tophat panel set made from laser cut acrylic (PMMA) sheets for the VORON0 V0.2. All panels are 3mm thick. Tophat height 100mm. Contents 4pcs side panels (212mm x 91mm) 1pcs top panel (212mm x 212mm) Cleaning Note don't use isopropanol or similar! only with water or special PMMA cleaner is allowed

CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

The MakerBeamXL T-slot nut is made of stainless steel and was specially designed to slide into the T-slot grooves of the MakerBeamXL profile. The T-slot nut is great to fasten brackets or corner cubes. These T-slot nuts are also compatible with OpenBeam. Both MakerBeamXL and OpenBeam are 15mmx15mm in diameter.