Weltweiter Versand
Versand mit DHL & UPS
14 Tage Geld-Zurück-Garantie
SSL-gesicherte Bezahlung

Spring Steel Sheet, VORON, 235 x 235 mm

Produktinformationen "Spring Steel Sheet, VORON, 235 x 235 mm"

Flexible springsteel sheet made from C85 alloy. Perfect to release your printed parts easily after printing. Simply bend the sheet by some degree and your printed parts pop right off your print surface.

Note

For improved longetivity, bend and release printed parts after letting both, the printed parts and the springsteel sheet, cool down to room temperature.

Note

The sheets are oiled to protect them from rust. Please clean the sheets before use!

Note

VORON0 (125 x 125 mm), Prusa Mini & Prusa MK52 do not have a Voron logo!

Eigenschaften "Spring Steel Sheet, VORON, 235 x 235 mm"
Maße / Dicke: 0.5 mm
Voron / Modell: Legacy
Voron / Spezifikation: 230
Hersteller "Fermio Labs GmbH"

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

Weiterführende Links des Herstellers
Bill of Materials for "Spring Steel Sheet, VORON, 235 x 235 mm"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120180230250300350
Annex K3
VORON Legacy 1
VORON Switchwire
VORON Trident
VORON0 V0.1
VORON0 V0.2
VORON1 V1.8
VORON2 V2.4

1 von 1 Bewertungen

5 von 5 Sternen


100%

0%

0%

0%

0%


Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


November 15, 2021 17:52

Quality

Nicely cut sheet. Be prepared to clean with a good IPA scrubbing. since it did come with some grime on it other than that spotless.

Start 3D printing on the shoulder of giants!

3D printing has never been easier with our flexible print surface system.

Flex Plates: our most versatile and flexible solution!

PEI Sheets: the genuine black Ultem® features superior bonding properties, especially with ABS.

Spring Steel Sheets: quick and easy part removal -- let it cool and flex it! They pop just right off!

Magnetic Sheets: strongest available on the market, holding your steel sheets flat and secure.

Build Plates: made from cast and stress relieved Aluminium. Its unique properties prevent excessive warping and the precision milled surface is the perfect foundation for a flat build surface.

Silicone Heaters: special made silicone heater, edge-to-edge, leave no room for cold zones. The power usage is optimised for our build plates and can be used to their full potential without risking deformation.

Silicone Heaters

Ausverkauft
Tipp
Top
V02
V01
Keenovo Silicone Heatmat, 110 x 110 mm, 24 V/DC, 60 W
Keenovo Silicone Heatmat, 110 x 110 mm, 24 V/DC, 60 W
Maße: 110 x 110 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

24,99 €*
Ausverkauft
Tipp
Top
ALL
Keenovo Silicone Heatmat, 240 x 240 mm, 230 V/AC, 300 W
Keenovo Silicone Heatmat, 240 x 240 mm, 230 V/AC, 300 W
Maße: 240 x 240 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
49,99 €*
Ausverkauft
Tipp
Top
ALL
Keenovo Silicone Heatmat, 290 x 290mm, 230 V/AC, 400 W
Keenovo Silicone Heatmat, 290 x 290mm, 230 V/AC, 400 W
Maße: 290 x 290 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
64,99 €*
Ausverkauft
Tipp
Top
V24
TRI
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
Maße: 340 x 340 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
84,99 €*

Build Plates

Tipp
Top
ALL
VORON Build Plate, 250 x 250 mm
VORON Build Plate, 250 x 250 mm
Maße: 250 x 250 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

Varianten ab 24,99 €*
49,99 €*
Tipp
Top
ALL
VORON Build Plate, 300 x 300 mm
VORON Build Plate, 300 x 300 mm
Maße: 300 x 300 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

Varianten ab 24,99 €*
59,99 €*
Ausverkauft
Tipp
Top
ALL
VORON Build Plate, 350 x 350 mm
VORON Build Plate, 350 x 350 mm
Maße: 350 x 350 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

Varianten ab 24,99 €*
74,99 €*
Tipp
ALL
VORON0 Build Plate, 120 x 120 mm
VORON0 Build Plate, 120 x 120 mm
Maße: 120 x 120 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through holes for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

24,99 €*

Magnetic Sheets

Ausverkauft
Top
V02
V01
Schallenkammer® GraviFlex® Magnetic Sheet 200, 125 x 125 mm
Schallenkammer® GraviFlex® Magnetic Sheet 200, 125 x 125 mm
Maße: 125 x 125 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

8,99 €*
Ausverkauft
Top
ALL
Schallenkammer® GraviFlex® Magnetic Sheet 200, 260 x 260 mm
Schallenkammer® GraviFlex® Magnetic Sheet 200, 260 x 260 mm
Maße: 260 x 260 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

Varianten ab 8,99 €*
27,99 €*
Ausverkauft
Top
ALL
Schallenkammer® GraviFlex® Magnetic Sheet 200, 310 x 310 mm
Schallenkammer® GraviFlex® Magnetic Sheet 200, 310 x 310 mm
Maße: 310 x 310 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

Varianten ab 8,99 €*
34,99 €*
Ausverkauft
Top
V24
TRI
Schallenkammer® GraviFlex® Magnetic Sheet 200, 360 x 360 mm
Schallenkammer® GraviFlex® Magnetic Sheet 200, 360 x 360 mm
Maße: 360 x 360 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

Varianten ab 8,99 €*
44,99 €*

PEI

Ausverkauft
Top
ALL
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Müller Tecfilm® Ultem® 1000, PEI sheet, 315 x 315 mm, black
Maße: 315 x 315 mm
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

19,99 €*
Ausverkauft
Top
V24
TRI
Müller Tecfilm® Ultem® 1000, PEI sheet, 365 x 365 mm, black
Müller Tecfilm® Ultem® 1000, PEI sheet, 365 x 365 mm, black
Maße: 365 x 365 mm
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

Varianten ab 19,99 €*
24,99 €*

Kunden kauften auch

Ausverkauft
Top
V24
TRI
Müller Tecfilm® Ultem® 1000, PEI sheet, 365 x 365 mm, black
Müller Tecfilm® Ultem® 1000, PEI sheet, 365 x 365 mm, black
Our black PEI sheets are backed with 3M™ 467 one-sided self-adhesive. They're made from SABIC ULTEM™ 1000 granulate and extruded by Dr. Dietrich Müller GmbH in Germany.

Varianten ab 19,99 €*
24,99 €*
Ausverkauft
Top
ALL
Bondtech Shaft Assembly
Bondtech Shaft Assembly
Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.Note: New improved revision from Bondtech, where the gear wheel is in white now! For more information see link

6,99 €*
Ausverkauft
Top
ALL
Schallenkammer® GraviFlex® Magnetic Sheet 200, 260 x 260 mm
Schallenkammer® GraviFlex® Magnetic Sheet 200, 260 x 260 mm
GraviFlex® magnetic foil 200, self-adhesive anisotropic multi-polarly magnetized operating temperature 120°C (up to 200°C temporary) Product characteristics Material thickness: 1 mm Remanence Br: 243 – 263 mT Coercivity HcB: 179 – 203 kA/m Coercivity HcJ: 211 – 257 kA/m Energy product (B × H)max.: 11,1 – 13,5 kJ/m³ Holding force: approx. 130 g/cm²

Varianten ab 8,99 €*
27,99 €*
Ausverkauft
Top
ALL
Bondtech Thumbscrew Assembly
Bondtech Thumbscrew Assembly
Thumbscrew replacement for Bondtech extruder.

1,99 €*
Top
ALL
OMRON D2F-5L Microswitch
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

2,99 €*
Ausverkauft
Top
ALL
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.

31,99 €*