Weltweiter Versand
Versand mit DHL, GLS & UPS
14 Tage Geld-Zurück-Garantie
SSL-gesicherte Bezahlung

SSR DIN Rail Mounting Adapter

Produktinformationen "SSR DIN Rail Mounting Adapter"

Adapter plate for mounting our SSR to our DIN rails.

Eigenschaften "SSR DIN Rail Mounting Adapter"
Voron / Model: Trident, VORON1 V1.8, VORON2 V2.4
Voron / Spec: 250, 300, 350
Hersteller "Pohltechnic.com GbR"
Weiterführende Links des Herstellers
Bill of Materials for "SSR DIN Rail Mounting Adapter"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120230250300350
VORON Legacy
VORON Switchwire
VORON Trident 1 1 1
VORON0 V0.1
VORON1 V1.8 1 1
VORON2 V2.4 1 1 1

1 von 1 Bewertungen

5 von 5 Sternen


100%

0%

0%

0%

0%


Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


October 17, 2021 09:13

Best price/quality I found

Better quality than cheap chinese equivalent (and not that cheaper). Same quality as 20/30€/more branded adapter. Go for it.

Top
DIN Rail, 368 mm
DIN Rail, 368 mm
DIN Rail / Length: 368 mm
DIN rail TS35x7.5. Cut to length burr-free, made from sendzimir galvanized steel. Hole pattern is 25x5.2mm and matches deck panel and aluminium extrusion distances so they can be mounted below the printer.

3,79 €*
Top
DIN Rail, 418 mm
DIN Rail, 418 mm
DIN Rail / Length: 418 mm
DIN rail TS35x7.5. Cut to length burr-free, made from sendzimir galvanized steel. Hole pattern is 25x5.2mm and matches deck panel and aluminium extrusion distances so they can be mounted below the printer.

Varianten ab 3,79 €*
3,89 €*
Top
V24
TRI
DIN Rail, 468 mm
DIN Rail, 468 mm
DIN Rail / Length: 468 mm
DIN rail TS35x7.5. Cut to length burr-free, made from sendzimir galvanized steel. Hole pattern is 25x5.2mm and matches deck panel and aluminium extrusion distances so they can be mounted below the printer.

Varianten ab 3,79 €*
3,99 €*
%
Top
SSR DIN Rail Mounting Adapter
SSR DIN Rail Mounting Adapter
Adapter plate for mounting our SSR to our DIN rails.

3,99 €* 4,99 €* (20.04% gespart)
%
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

12,99 €* 14,99 €* (13.34% gespart)
Ausverkauft
Tipp
Top
Keenovo Silicone Heatmat, 240 x 240 mm, 230 V/AC, 300 W
Keenovo Silicone Heatmat, 240 x 240 mm, 230 V/AC, 300 W
Dimensions: 240 x 240 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
49,99 €*
Ausverkauft
Tipp
Top
Keenovo Silicone Heatmat, 290 x 290mm, 230 V/AC, 400 W
Keenovo Silicone Heatmat, 290 x 290mm, 230 V/AC, 400 W
Dimensions: 290 x 290 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
64,99 €*
Ausverkauft
Tipp
Top
V24
TRI
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
Keenovo Silicone Heatmat, 340 x 340 mm, 230 V/AC, 500 W
Dimensions: 340 x 340 mm
The silicone heatmats were custom designed by Fermio Labs and made to spec by Keenovo. All heaters are optimized for our build plates shapes and hole positions. They allow even heating almost all the way to the edges of the build plate. The power is adjusted to allow running them at 100 % power without risking damage to the build plate instead of the 50% to 80% PWM limit recommended for the heaters listed on the BOM. The standard DIN466 thumb nuts used in all Voron printers used as spacers (VORON2) or levelling nuts (Trident, VORON0 and VORON1) can be used as guides to align the heater. For added safety all heaters come with a self resetting bi-metal 150C thermostat. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation). Thermistor used is a NTC 100K thermistor (Beta 25/50 3950K-1%, click here for the R-T datasheet) Choose type 11 or 13 in Marlin firmware. Use "Generic 3950" in Klipper. SKU/Model Compatibility Dimensions Voltage Watt Ampere Thermostat FLG-VRN-KNV-110 VORON0 110 x 110 mm 24 V/DC 60 W 2.5 A 150° C FLG-VRN-KNV-240 250 Trident, VORON1, VORON2 240 x 240 mm 230 V/AC 300 W 1.3 A 150° C FLG-VRN-KNV-290 300 Trident, VORON1, VORON2 290 x 290 mm 230 V/AC 400 W 1.7 A 150° C FLG-VRN-KNV-340 350 Trident, VORON2 340 x 340 mm 230 V/AC 500 W 2.1 A 150° C

Varianten ab 24,99 €*
84,99 €*
%
Top
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
Solid State Relay (SSR), DC/AC, 120/230 V/AC, 10 Ampere
This solid state relay can switch load currents in the range of 24-480VAC (usually 230V) up to currents of 10A. zero cross switching galvanic isolation (opto-isolator) touch protection (IP20) switching state signaling with LED Downloads A-Senco SSR-500-1DA48-10 Datasheet

12,99 €* 14,99 €* (13.34% gespart)
> 500 lagernd
Top
OMRON D2F-5L Microswitch
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

2,99 €*
> 500 lagernd
Top
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.

Inhalt: 10 Stück (0,30 €* / 1 Stück)

2,99 €*
Top
DIN Rail, 418 mm
DIN Rail, 418 mm
DIN rail TS35x7.5. Cut to length burr-free, made from sendzimir galvanized steel. Hole pattern is 25x5.2mm and matches deck panel and aluminium extrusion distances so they can be mounted below the printer.

Varianten ab 3,79 €*
3,89 €*
Ausverkauft
Tipp
Top
VORON Build Plate, 300 x 300 mm
VORON Build Plate, 300 x 300 mm
CNC machined, precision milled and stress relieved cast aluminium plate with four slots (V2.4) and three counterbores (V1.8, Trident) to mount. The underside features two M3x0.5 threaded through for protective earth and temperature fuse. Chamfered from all sides. With our customized Keenovo Heatmat you get the best combination for your printer.

Varianten ab 24,99 €*
59,99 €*
Top
V24
TRI
Knurled Nut, M4, DIN466-B
Knurled Nut, M4, DIN466-B
Flat knurled nuts are suitable for universal use and can be tightened and loosened easily without tools.

0,49 €*