Weltweiter Versand
Versand mit DHL, GLS & UPS
14 Tage Geld-Zurück-Garantie
SSL-gesicherte Bezahlung

StealthBurner RGB LED Kit

Produktinformationen "StealthBurner RGB LED Kit"

StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector.

Hint

Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness.

Note

The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

Eigenschaften "StealthBurner RGB LED Kit"
Voron / Extruder: Stealthburner
Voron / Model: Legacy, Switchwire, Trident, VORON1 V1.8, VORON2 V2.4
Voron / Spec: 230, 250, 300, 350
Hersteller "Fermio Labs GmbH"

Fermio Labs provides the Voron Design community with high quality products. The founders are deeply rooted in and connected with the community and want to make Voron 3D printers more accessible.

Weiterführende Links des Herstellers
Bill of Materials for "StealthBurner RGB LED Kit"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120230250300350
VORON Legacy 1
VORON Switchwire 1
VORON Trident 1 1 1
VORON0 V0.1
VORON0 V0.2
VORON1 V1.8 1 1
VORON2 V2.4 1 1 1

0 von 0 Bewertungen

Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


Top
ALL
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech Drive Gear Set, 1.75 mm Filament, 5 mm Shaft
Bondtech / Drive Gear: 1.75 mm / 5 mm
Bondtech drive gear kit in hardened and surface protected steel. Precision cnc-machined. Super sharp teeths for maximum grip on the filament. The perfect choice for a high-performance feeding system. Extremely high wear resistance for use with abrasive filaments. These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 5 mm, secondary gear with two needle bearings, M3x2 setscrew and one 3x20 mm shaft. Gear set for filament size 1.75 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. Gear set for filament size 2.85 – 3.0 mm, primary gear with inner diameter 8 mm, secondary gear with integrated needle bearings, M4x3 setscrew and one 4x22 mm shaft. A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.

31,99 €*
Top
ALL
Bondtech Shaft Assembly
Bondtech Shaft Assembly
Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders. It includes the set screw for primary 1.75/5.0 drive gear.Note: New improved revision from Bondtech, where the gear wheel is in white now! For more information see link

4,99 €*
Top
ALL
Bondtech Thumbscrew Assembly
Bondtech Thumbscrew Assembly
Thumbscrew replacement for Bondtech extruder.

1,99 €*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Inhalt: 100 Stück (0,09 €* / 1 Stück)

8,99 €*
Tipp
Top
ALL
E3D Revo™ Voron Edition, 24V, Single Nozzle Kit
E3D Revo™ Voron Edition, 24V, Single Nozzle Kit
E3D / Revo / Kit Type: Single Nozzle Kit | Voltage: 24 V/DC
E3D developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with their Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers. Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening Works with a Revo HeaterCore for faster heat-ups Rigid mounting using 4 x M3 x 0.5 bolts Ultra-lightweight construction for improved speed performance Ideal HotEnd for Voron StealthBurner Ready for Revo A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers. Complements your Voron Includes an anodised red aluminium heatsink to complement your Voron accented parts. Rigid mounting This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer. Wire harness compatibility Please note that this is a custom production. The Thermistor and HeaterCore are wired to match our wire harness.

89,99 €*
Top
MR85 2RS / MR 085 2RT, 5 x 8 x 2.5 mm, Miniature Deep Groove Ball Bearing
MR85 2RS / MR 085 2RT, 5 x 8 x 2.5 mm, Miniature Deep Groove Ball Bearing
Bearings: MR85-2RS
Miniature ball bearings are deep groove ball bearings in small. Their dimensions make them suitable for special applications. In addition, they allow very high speeds with low noise.

Varianten ab 0,99 €*
1,49 €*
Nur 9 auf Lager!
ALL
Stealthburner E3D Revo Voron Mount Printed Parts
Stealthburner E3D Revo Voron Mount Printed Parts
Front and back of the Stealthburner Clockwork2 E3D Revo Voron toolhead mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

23,99 €*
Nur 8 auf Lager!
ALL
Stealthburner LGX Lite Mount Printed Parts
Stealthburner LGX Lite Mount Printed Parts
Stealthburner Clockwork2 compatible Bondtech LGX Lite mount with igus energy chain mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.

23,99 €*
Top
ALL
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit
StealthBurner RGB LED Kit, pre-wired. Total of three SK6812 RGBNW LEDs. Wire terminated with 3-pin Molex Microfit 3.0 connector. Hint Use our prepared connection cable StealthBurner RGB LED Wire Harness to update your wire harness. Note The M42 hexnut and 3D printed parts are not part of this kit and are pictured for demonstration purposes only.

5,99 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 250 Spec
StealthBurner RGB LED Wire Harness, 250 Spec
Voron / Spec: 250
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

10,49 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 300 Spec
StealthBurner RGB LED Wire Harness, 300 Spec
Voron / Spec: 300
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Varianten ab 10,49 €*
11,49 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 350 Spec
StealthBurner RGB LED Wire Harness, 350 Spec
Voron / Spec: 350
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Varianten ab 10,49 €*
12,49 €*
Tipp
Top
SUNON MF50151VX-B00U-A99
SUNON MF50151VX-B00U-A99
SUNON / Fan: MF50151VX-B00U-A99
The SUNON MF50151VX-B00U-A99 is suitable for Nevermore Micro V4 and V5 Duo. Note The fan comes without any connectors, just bare wires. Contents 1 pcs of SUNON MF50151VX-B00U-A99

9,99 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 350 Spec
StealthBurner RGB LED Wire Harness, 350 Spec
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Varianten ab 10,49 €*
12,49 €*
> 500 lagernd
Top
ALL
OMRON D2F-5L Microswitch
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A

2,99 €*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Inhalt: 100 Stück (0,09 €* / 1 Stück)

8,99 €*
Top
ALL
StealthBurner RGB LED Wire Harness, 300 Spec
StealthBurner RGB LED Wire Harness, 300 Spec
Wire harness addition for our StealthBurner RGB LED Kit using black Helukabel Heluflon®-fep-6y 0.25mm². One end with a Molex MicroFix 3.0 connector, the other end with a Dupont connector fitting for BTT Octopus and Fysetc Spider.

Varianten ab 10,49 €*
11,49 €*
> 500 lagernd
Top
ALL
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round Neodym Magnets, 6 x 3 mm, N52, coated black, electrically non conductive
Round neodym magnet, 6 x 3 mm, N52 (≤ 80 °C), epoxy coated black. Note Electrically non conductive.

Inhalt: 10 Stück (0,30 €* / 1 Stück)

2,99 €*
Top
ALL
Voron Nozzle Endstop
Voron Nozzle Endstop
DIY Z Endstop PCB, requires custom printed part and soldering. Contents 1x PCB 1x 3-Pin JST-XH connector 1x Omron D2F-5L Hint Use our prepared connection cable Nozzle Endstop Wire Harness Downloads Z-Switch_FermioLabs_Rev1.stl Note Pins of the connector and microswitch have to be cutted very flat before soldering!

4,99 €*