Weltweiter Versand
Versand mit DHL, GLS & UPS
14 Tage Geld-Zurück-Garantie
SSL-gesicherte Bezahlung

Voron Carbon Fiber X Gantry, 250 spec

Produktinformationen "Voron Carbon Fiber X Gantry, 250 spec"

Light weight carbon fiber X gantry replacement for Voron 2 & Trident.

  • much lighter than aluminium extrusion
  • suits MGN12
  • rigid 2mm wall design
  • includes mounting/installation hardware

Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications.

This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market.

Size

  • 250 spec = 330 mm length
  • 300 spec = 380 mm length
  • 350 spec = 430 mm length

Features

  • much lighter than the aluminium counterpart
    Alu XCF XWeight Saved
    330 mm156 g66 g90 g
    380 mm180 g78 g102 g
    430 mm202 g86 g116 g
  • drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350)
  • adequate mounting holes for MGN12 linear rails
  • adequate access to all rail/top mounting screws / nuts
  • multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables
  • tested to an operating temperature of 90c

What’s included

  • carbon fibre square tube
  • 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods)
  • 10x M3 flanged and serrated hex nuts (since 16th of March 2023)
  • 10x M5 flanged and serrated hex nuts (since 16th of March 2023)
  • M3 5.5mm hex nut driver (since 16th of March 2023)

Installation

Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly.

The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts.

There are 2 changes from standard manual assembly:

  1. Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints.
  2. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed.

For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo.

https://github.com/Woki-Leo/Carbonfiber-X-Axis

*WARNING*

Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions.

https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet

Eigenschaften "Voron Carbon Fiber X Gantry, 250 spec"
Voron / Modell: Trident, VORON2 V2.4
Voron / Spezifikation: 250
Hersteller "Unique Prints"
Weiterführende Links des Herstellers
Bill of Materials for "Voron Carbon Fiber X Gantry, 250 spec"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
Model / Spec120180230250300350
Annex K3
VORON Legacy
VORON Switchwire
VORON Trident 1
VORON0 V0.1
VORON0 V0.2
VORON1 V1.8
VORON2 V2.4 1

0 von 0 Bewertungen

Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


Nur 1 auf Lager!
Tipp
V24
TRI
Voron Carbon Fiber X Gantry, 300 spec
Voron Carbon Fiber X Gantry, 300 spec
Light weight carbon fiber X gantry replacement for Voron 2 & Trident. much lighter than aluminium extrusion suits MGN12 rigid 2mm wall design includes mounting/installation hardware Please choose the appropriate length tube for your machine and/or see below for more information and technical specifications. This carbon fiber x gantry replacement was developed after testing and trialing some of the carbon fiber gantry replacement options available in market. Size 250 spec = 330 mm length 300 spec = 380 mm length 350 spec = 430 mm length Features much lighter than the aluminium counterpart Alu X CF X Weight Saved 330 mm 156 g 66 g 90 g 380 mm 180 g 78 g 102 g 430 mm 202 g 86 g 116 g drop in replacement on all existing spec Voron 2 and Voron Trident models (250 / 300 / 350) adequate mounting holes for MGN12 linear rails adequate access to all rail/top mounting screws / nuts multiple mounting points for chains and alternative toolhead wiring solutions like Roadkill toolhead pcbs using flat/ribbon style cables tested to an operating temperature of 90c What’s included carbon fibre square tube 2x 250mm length 5mm carbon rod – diameter tolerance of 4.96-4.99mm (for other weight saving projects / mods) 10x M3 flanged and serrated hex nuts (since 16th of March 2023) 10x M5 flanged and serrated hex nuts (since 16th of March 2023) M3 5.5mm hex nut driver (since 16th of March 2023) Installation Our tube uses the spec Voron mounting pattern / locations for the top and bottom M5 bolts as described in the manual assembly instructions for both Voron 2 and Voron Trident so there is no difference from standard gantry assembly. The tube is also 2020 in dimension, matching the specced aluminium extrusion and compatible with the rail centering printed parts. There are 2 changes from standard manual assembly: Printed hex nut holders are needed and inserted into the square tube to secure and align the hex nuts for the incoming M5 bolts that attach the X gantry to the XY joints. As the carbon gantry does not have slots or channels in the center of the faces, alternate XY joints are required to be printed that do not have locating notches that usually go into the slot of the aluminium extrusion. These are the stock XY joints with the locating notches removed. For further modification and weight reduction in addition to the carbon fibre gantry. The pins mod is available here from Woki Leo. https://github.com/Woki-Leo/Carbonfiber-X-Axis *WARNING* Cutting carbon fiber releases dangerous and harmful particles when cut. Please be aware and take the necessary precautions. https://www.monash.edu/ohs/info-docs/chemical-management/carbon-fibre-composites-ohs-information-sheet

Varianten ab 54,99 €*
59,99 €*
Tipp
Nobufil ABS-X, Astro Grey, 1.75 mm, 1 kg
Nobufil ABS-X, Astro Grey, 1.75 mm, 1 kg
Das ABS-Filament von Nobufil wird aus recycelten Kunststoffen hergestellt. Dabei handelt es sich um Produktionsabfälle, die bei der industriellen Verarbeitung anfallen. Durch spezielle Modifikation neigt dieses Material im Gegensatz zu Filamenten aus herkömmlichen ABS zu deutlich weniger Warping und weist eine reduzierte Geruchsbildung auf. Dadurch ist auch eine Verarbeitung auf Druckern mit offenem Bauraum möglich. Die physikalischen Eigenschaften von Nobufil ABSx umfassen eine hohe Zugfestigkeit und Steifheit. Außerdem weist es eine gute Wärme- und Chemikalienbeständigkeit auf. Gedruckte Teile können anschließend einfach nachbearbeitet werden. Dadurch eignet sich dieses Material besonders für die Herstellung von Prototypen, Modellen und Kleinserien von technischen Teilen. Temperaturbeständigkeit bis ca. 90°C Breite Farbpalette durch geringe Eigenfarbe Einfache Verdruckbarkeit auch mit offenem Bauraum Geringe Geruchsentwicklung Hohe Detailgenauigkeit auch bei komplexen Geometrien Print Settings Print temperature: 260°C ± 10 Bed temp: 100°C ± 10 Printing surface: textured PEI sheet Fan speed: max 15%

29,99 €*
Top
ALL
Brass Heat Insert, 5 x 4 mm, M3
Brass Heat Insert, 5 x 4 mm, M3
Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Inhalt: 100 Stück (0,09 €* / 1 Stück)

8,99 €*
Ausverkauft
Tipp
Top
V24
TRI
VSW
Fermio OptoTap PCB (12/24 Volt)
Fermio OptoTap PCB (12/24 Volt)
Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play The design includes a supply polarity and overshoot protection.Technical Data 12V or 24V supply Open drain signal output Optional 10k pull-up (against internal +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

17,99 €*
Nur 9 auf Lager!
Top
V24
TRI
VSW
CPC MR 12ML, 300 mm
CPC MR 12ML, 300 mm
Genuine CPC miniature linear guideway; single rail cut to length with a single long block. Highest preload (V1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. The blocks feature an injection hole for lubrication. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.

Varianten ab 39,99 €*
74,99 €*
> 500 lagernd
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.

Inhalt: 10 Stück (0,40 €* / 1 Stück)

Varianten ab 2,99 €*
3,99 €*