Voron Tap Printed Parts
Abbildung ähnlich
25,99 €*
Inhalt: 1 Satz 3D-gedruckter Bauteile
Sofort verfügbar, Lieferzeit 2-5 Werkage
Produktnummer: LRGR-TAP
Produktinformationen "Voron Tap Printed Parts"
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch.
Note
You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.
Content
- 1x MGN9_Assembly_Tool
- 1x Printed_Cut_Guide
- 1x Tap_Front_r2
- 1x Tap_Magnet_Left_r2
- 1x Tap_Magnet_Right_r2
- 1x Tap_Upper_PCB_r2
- 1x Tap_Center_r6
Hersteller "layer.guru"
Years of building printers and printing, focused in on one thing: delivering highest quality 3D printed parts. Fast. Flawless!
Weiterführende Links des Herstellers
Bill of Materials for "Voron Tap Printed Parts"
Our Bill Of Materials is a usefull tool while sourcing your VORON.
| Model / Spec | 120 | 230 | 250 | 300 | 350 |
|---|---|---|---|---|---|
| VORON Legacy | |||||
| VORON Switchwire | |||||
| VORON Trident | 1 | 1 | 1 | ||
| VORON0 V0.1 | |||||
| VORON0 V0.2 | |||||
| VORON1 V1.8 | |||||
| VORON2 V2.4 | 1 | 1 | 1 |
Anmelden
> 500 lagernd
Top
ALL
OMRON D2F-5L Microswitch
Endstop Microswitch usable for X/Y/Z. Type: D2F-5LRating: 250 V/AC - 5A
2,99 €*
> 500 lagernd
ALL
Round Neodym Magnets, 6 x 3 mm, N35H (high temp), electrically conductive 3,99 €*
Magnet: N35H, silver, uncoated, electrically conductive
Round neodym magnet, 6 x 3 mm, N35H (≤ 100 °C), nickel plated. Note Electrically conductive.
Inhalt: 10 Stück (0,40 €* / 1 Stück)
Varianten ab 2,99 €*
Tipp
Top
V24
TRI
VSW
OptoTap PCB (V2.1+, 5 Volt only!)
Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play (For the 5V version you need to ensure 5V, we are working on some documentation. You can also open a ticket for some help!).INFO: (Updated 5.1.23) At the moment we deliver a 5V only version. There are some issues with the official design. Even with some intermediat solusions we see remaining risk. Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)
14,99 €*
Top
Fermio MGN9H, 50 mm, 440C SUS (silver) 14,99 €*
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
Varianten ab 12,99 €*
Nur 9 auf Lager!
ALL
Stealthburner E3D Revo Voron Mount Printed Parts
Front and back of the Stealthburner Clockwork2 E3D Revo Voron toolhead mount. Note You are buying 3D printed parts only. Any additional hardware shown is for demonstration purposes only.
23,99 €*
Tipp
Top
Nevermore Activated Carbon, small bag (0.8 L)
Nevermore offers its own premium carbon of unmatched specifications through selected Voron resellers. Its the best activated carbon for 3D printer use we have found after speaking to most major, vetted suppliers, offering benzene adsorption of up to 48 wt%, surface area of 1250 and CTC value of 80. It doesn't come cheap compared to bulk carbon from amazon, but its safe, has unbeatable performance, and every purchase supports the nevermore project by at least a dollar. CTC(wt.%): 80 Surface area(m2/g): 1250 Density: 420g/L Ball pan hardness: >98 Benzene adsorption(wt.%): up to 48
Inhalt: 0.8 liter (16,24 €* / 1 liter)
12,99 €*
Neu
CPC MR 9ML, 50 mm
Genuine CPC miniature linear guideway; single rail cut to length with a single long block. Highest preload (V1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. The blocks feature an injection hole for lubrication. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
39,99 €*
Top
V24
TRI
Fermio MGN12H, 400 mm, 440C SUS (silver) 33,99 €*
Fermio Labs miniature linear guideway; single rail cut to length with a single long block. Highest preload (Z1) and normal (N) precision guarantees a stiff / play-free and binding-free motion. Unlike most of the linear guideways produced in China, our blocks feature a functional injection hole / grease port for lubrication which is compatible with our lubrication kit. Warranty The blocks and rails are non-interchangeable - keep the blocks on the rails! A violation does expire warranty effectively. Cleaning We strongly recommend to clean the rails before lubrication. Put a zip tie through the very last holes to ensure the block can not escape the rail. Fill a glass with some grease solvent and soak the blocks for at least an hour. Rinse the blocks and wipe the rail from any residue grease with a lint-free cloth. Lubrication We recommend to lubricate the ball races and bearing balls with grease, and cover the entire rail itself in a thin coat of grease to prevent oxidation. Recommended lubricants (in no particular order): CPC Lubrication Kit 18G Fuchs Planto Multispray S Fuchs Lagermeister BF2 Mobilux EP 1 or EP 2 HIWIN G05 Note: lubricants containing MoS2 or graphite must not be used.
Varianten ab 12,99 €*