VORON0 V0.2 Top Hat Acrylic Panels

Enclosure panel set made from CNC machined aluminium composite panel sheets for the VORON0.2 With our "easy-slot-cut" the deck panel easily fits into the extrusion slot without big force. All panels are 3mm thick. Contents 1pcs deck panel (no print) 1pcs middle panel 2pcs back panels (top & bottom) 1pcs motor panel1pcs bottom panel Cleaning Note don't use isopropanol or similar! only with water is allowed

Brass heat inserts, specially developed for FDM 3D printed parts and post-insertion.

Optical sensor PCB for TAP including adapter cable to our wire harness for Plug&Play (For the 5V version you need to ensure 5V, we are working on some documentation. You can also open a ticket for some help!).INFO: (Updated 5.1.23)  At the moment we deliver a 5V only version. There are some issues with the official design. Even with some intermediat solusions we see remaining risk. Warning Do not connect or disconnect the PCB when the printer is powered! Technical Data 5V supply voltage only Open drain signal output Optional 10k pull-up (against +5V) on signal output (via solder bridge) OPB971N51 sensor Contents 1x full assembled and 100% tested PCB 1x short cable (JST-PH => Molex Microfit 3.0)

VORON0 V0.1/V0.2 frame kit, custom production by ODM. All aluminium extrusions are sand-blasted and anodized after machining to provide a clean and matte look; every end is tapped with a M3x0.5 6H x 10 mm thread; T-slot nut width is 3 mm and compatible with our MakerBeam T-slot nuts. Kirigami Be aware that we leave out the 3 x 100 mm extrusions for the bed assembly on purpose; we provide this frame with a full Kirigami (same color) instead.  Contents Quantity 120 spec 6 pcs/kit FLG-AKP-1515-200 4 pcs/kit FLG-AKP-1515-200-LCH-75-RCH-75 2 pcs/kit FLG-AKP-1515-200-LCH-75-RCP-75 4 pcs/kit FLG-AKP-1515-200-LCH-295 1 pcs/kit FLG-VRN-V01-MOD-KIRIGAMI Machining LCH75: horizontal through holes with 7.5 mm distance from left end face LCH295: horizontal through holes with 29.5 mm distance from left end face RCH75: horizontal through holes with 7.5 mm distance from right end face RCP75: crisscross through holes with 7.5 mm distance from right end face

Thumbscrew replacement for Bondtech extruder.

Number of poles: 2 + PEContinuous current: 10AFuse holder: 6.3APin temperature: 70°CRated voltage: 250V ACWith rocker switch and fuse holderCombination consists of appliance plug, 2-pole rocker switch and fuse holder for fuse link(5x20mm)Connection by flat cable plug 4.8mmSnap-in assemblyNote:  fuse is not included